Corrosion behavior and corrosion products of a low carbon bainite steel in three kinds of typical environments
Because of the place obstruction of corrosion products in the surface of the alloys, while corrosion time is at 120 minutes above, the corrosion rate descends to the stable value in 48 hours.
"Normally, corrosion products (e.g., rust, patina) stay on the surface and protect it. Removing these deposits reexposes the surface, and corrosion continues. Some materials resist corrosion naturally; others can be treated to protect them (e.g., by coating, painting, galvanizing, or anodizing). "
Co-precipitation of nano-crystalline corrosion products on hot dip Zn-Al alloy coating
Here Raman microscopy and electro probe technique were used to identify the corrosion products and their locations on and within of ancient Yuan Dynasty bronze mirror from Lufeng of Yunnan province.
The partial pressure of iodine influents the thickness of corrosion products, and intergranular cracking is easier to be found when iodine partial pressure is high enough.
The corrosion products formed on ethylbenzene reactor have been examined by using EDX and XRD.
The corrosion products of RFCC main fractionator and its absorption and stabilization system were analyzed and assessed. Practical effective measures were suggested based upon the actual conditions.
